In winter, not only low temperature is a factor that affects infrared cameras, but also the sealing performance of each component is a significant challenge. Low temperature will impact the performance of electronic components, such as decreased battery life, electro-optical system malfunctions, etc. Low temperature, rain or snow will also caus...

In the process of performing reconnaissance and strike missions, UAVs need to carry various electro-optical payloads, such as infrared thermal imaging cameras, laser rangefinders, etc. During flight, the UAV’s attitude movement and the windage torque will cause the boresight pointing to be unstable. These external factors will seriously affect ...

1. Security SurveillanceWidely employed in video security surveillance for sensitive areas such as shopping malls, communities, banks, warehouses, etc., especially for night security.2. Personal consumptionCommonly used in outdoor activities like adventures and field scientific expeditions. Some manufacturers have developed mobile phones with p...

An infrared optical window is a selectively transparent component designed based on its material to allow specific wavelengths of light to pass through. These windows are carefully designed to maintain optical clarity, withstand environmental conditions, and minimize any distortion or alteration of the light passing through them. They are prima...

EO/IR stands for "Electro-Optical/Infrared," a comprehensive technology that integrates Electro-Optical (EO) and Infrared (IR) sensing. Both technologies are used for the detection and acquisition of light and thermal radiation in different wavelength bands, enabling surveillance, reconnaissance, navigation, and other applications. Specifically...

Thermal sensitivity (NETD) stands for Noise Equivalent Temperature Difference, which is a critical parameter for evaluating Medium-Wave Infrared (MWIR) and Long-Wave Infrared (LWIR) thermal imaging cameras. It is a value that represents the signal-to-noise ratio of the temperature difference, which is equivalent to the instantaneous noise of th...

The infrared sight consists of objective lens, shell, eyepiece, battery, connector, etc., as shown in the diagram 1. Diagra...

Infrared sights works at infrared bands, whose characteristics of imaging have a obvious advantage over white light sights, having a significant meaning in the modern battlefield.Firstly, all the objects emit infrared radiation, which infrared sights can transmit into electrical signal, then process and form digital image displayed on t...

1. The composition and working principle of laser rangefinder:· The laser rangefinder consists of an optical system, a laser, a drive circuit, a receiving circuit, a signal processing circuit, a system power circuit and an external data interface circuit, as shown in the figure below: ...

The stray lights will exist in every optical-mechanical system, which is impossible to completely eliminate, but can be reduced through certain methods. The methods of suppressing stray lights are mainly three aspects: optical design, mechanical structure and surface finishing. · In terms of optical design, stray lights can be suppress...

With the development of computer hardware and software technology and its application in the design of optoelectronic systems, many representative design and simulation tools and software sprung up. These include: ZEMAX, CODE V, OSLO, LENSVIEW, ASAP, TRACEPRO, LIGHTTOOL, TFCALC, OPTISYS_DESIGN, ASLD, Multisim, COMSOL Multiphysics and so...

Modulation Transfer Function (MTF) of a lens is an important indicator of its performance. Both lens designers and users need to have a deep understanding of MTF.1. What is MTF?The function of the lens is to image the object on the sensor. An object is composed of countless points. The image formed by every single point of the object wi...

Both are variable lenses with variable focal length and adjustable sharpness. But there is several fundamental differences:A. Structurally, a continuous zoom lens has two sets of adjustable lenses, which are used to adjust the focus and sharpness respectively. The dual-field lens has only one set of adjustable lenses, which is used to s...

Yes, we can. Whether replacing parts or changing the design of components, Quanhom will try it best to meet your needs and provide you with professional advice and solutions. As one of the advanced opto-mechatronics component companies, we are delighted to serve our global partners with comprehensive services. The GLE12014D lens co...

Optomechanical systems are typically made of several materials with different thermal properties. These materials compose the optics (refractive or reflective elements) and the mechanics (optical mounts and system housing). As the temperature of these materials change, the volume and index of refraction will change as well, increasing s...

(1)The focal length can be changed uniformly as well as continuously. With the increasing improvement of processing and assembling technology, the application of the zoom structure is becoming more and more common, and its function is becoming more and more convenient. In the continuous zoom system, the focal length can be uniformly cha...

Yes, we can. Quanhom believes that customization is not only an essential service, but also what we always pursuit. As one of the advanced opto-mechatronics component companies, we are delighted to serving our global partners matching different OLEDs with comprehensive services. In the past five years, we have offered a variety of custo...

According to the summary of scholars and research institutions at home and abroad, there are five main contact forms among the pressing ring, the spacer and the concave-convex lens: sharp corner, tangential, toroidal, spherical, and oblique plane.1) Sharp corner interfaceOn a pressing ring or spacer, a curved surface with a radius of ab...

(1) Equal gap design. Equal gap refers to the design of the motion curve of the zoom group as a straight line. That is, the movement of the zoom group along the optical axis is linearly related to the cam angle, and the movement of the compensation group and the cam angle are non-linear. The advantages: convenient processing, high proce...

The consistency of products to great content determines the product quality, only high consistent product can offer a better purchasing and user experience for clients. QUANHOM is an infrared specialty team that adheres to the principle of “Quality Foremost; Service Centered; Progress Guided; Innovation Driven” to practically implement ...

At present, the switching time of the dual field of view lens of the QUANHOM team is ≤3S. There are many factors that influence the parameter. Firstly, for the optical design aspect, the moving distance of the moving lens group plays a defining role in the switching time. Secondly, in the mechanical design aspect, the design of the cam ...

Temperature variation will result in changes in all parameters of the infrared system, which will influence its image plane position and image quality. Therefore, athermalized design is required. Generally, temperature affects the infrared system in the following three ways:1. The refractive indexes of the infrared optical component...

Without considering atmospheric transmittance and radiative transmission loss,A. To the source point, the irradiance of the object at the source point is inversely proportional to the square of the distance. Although the radiation intensity of the source point does not change, the field angle between the source point and the thermal ...

Many factors can affect thermal imaging temperature measurements, such as the emissivity of the target, the radiation temperature of the target, the atmospheric radiation temperature, the ambient reflection temperature, and other external factors; meanwhile, it is also affected by the lens temperature, the temperature of the detector ar...

1.Sensitivity. Near the peak of the focusing function, when the abscissa changes simultaneously, the y-coordinates of different focusing curves change to various degrees. The more significant is the y-coordinate variation near the peak value, the easier it is to find the real focal plane.2.Width of the Steep Region of the Curve. In the ...

A. image space stitching (internal stitching) refers to the image stitching using multiple detectors, which can be done directly, or by using optical elements. In both ways, inner stitching arranges the detectors in a certain order to form a whole receiving target plane. Some have proposed stitching by reflective prismatic decompositi...

1. Dual-detector and dual-band imaging technologyThe method uses two detectors with different wavelength bands and separate optical systems to construct dual-band imaging, and then obtains dual-band images through image registration and fusion technology.2. Dual-line and dual-band imaging technologyTwo-band detection line arrays are pla...

1. Determine the use band according to the usage scenario, system requirements, cost requirements, etc. Most of the occasions use a single band such as short wave, medium wave or long wave, but some special occasions need to use multiple bands. ...

What is the difference between super-large field of view infrared optical lens and ordinary infrared optical lens? ...

A. In the continuous zoom process, the distance between each lenses has been strictly determined. At the structural design step, there are strict requirements on the size of the lens group and the lens barrel, and it is not easy to adjustB. Increasing the axial length of the guide rail can make the lens group more stable du...

1. Security monitoring: border security, urban security, coastal monitoring2. Infrared temperature measurement: industrial temperature measurement, human body temperature measurement, intelligent breeding3. Outdoor night vision: outdoor exploration, outdoor observation, outdoor search and rescue4. National defense and coastal defense: b...

Diamond-like carbon (DLC) membrane is an amorphous carbon membrane. The membrane contains a certain number of sp3 bonds, giving it a series of excellent properties close to diamond. It has the advantages of low deposition temperature and large area deposition.Among various hard membranes, DLC membrane can be positioned as a membrane mat...

If the motor stops suddenly:1. First check whether the cam of the lens has turned to the limit position.Because the limit switch can disconnect the circuit when the cam turn to the limit position, making the motor unable to run in one direction.2. If the cam of the lens is not in the limit position, check the wiring and power supply. ...

When designing infrared optical components, various factors related to the optical materials used must be considered. These factors include refractive properties, optical transmission, non-thermal properties, hardness/durability, environmental sensitivity, weight/density, manufacturing technology, and cost. Some of these factors are sti...

Anti-reflective coating (English: Anti-reflective coating, AR) is a surface optical coating that increases transmittance by reducing light reflection. In complex optical systems, it can improve contrast by reducing scattered light in the system. Many coatings include transparent film structures with different refractive indices. The th...

Atmospheric window fefers to some bands of celestial radiation that can penetrate the atmosphere. Due to the absorption and reflection of radiation by various particles in the earth's atmosphere, only radiation from celestial bodies in certain wavebands can reach the ground. Divided into optical window, infrared window and radio window ...

1. The space enclosed by the MTF curve, the horizontal axis and the vertical axis, the larger the area, the better, and the better the lens imaging performance. The flatter the MTF curve, the better. The flatness indicates the imaging uniformity of the edge and center of the lens.2. The closer the sagittal curve and the meridian curve, ...

Although without zooming and automatic focus function, even installed with a continuous zoom lens or motorized lens, the thermal imaging module can't realize zooming or automatic focus function, We can realize these functions in the case of not changing thermal imaging module by using other subsidiary products like automatic focus contr...

There are three main formats of analog video signals; PAL,NTSC and SECAM, in which PAL is called P system and NTSC is called N system, as is often said.PAL (phase Alternating Line) is a TV system established in 1965. With the exception of NTSC in parts of North America and East Asia and SECAM is adopted in most parts of the world, which...

There are two general types of spectral filters for thermal imaging cameras.One is a neutral density filter (ordinary filter), which attenuates the energy of the entire wavelength range to the same degree. For example, neu...